You can assign up to sixteen functions to each button by selecting from a list of standard functions described in the next section or defining macros as described in the section Defining a Macro on page 44.

Standard Mouse Functions●Select

This will select all text from the start position (mouse button held down) to the finish position (mouse button released), working left to right across the entire width of the display.

●Extend Selection

Enables the current selection to be extended.

●Copy

This will copy the current selection to the Clipboard.

●Paste

This will paste the contents of the Clipboard at the current cursor position.

●Move Cursor

When the emulator is in any of the local block modes you can use the mouse instead of the cursor keys to position the text cursor using this function.

●Select Rect

This will only select text contained within the rectangular area defined by the start position (mouse button held down) which sets the top left corner, and the finish position (mouse button released) which sets the bottom right corner of the rectangular area.

●Select Word

This will select the word under the mouse cursor.

●Select Line

Defining Mouse Functions

43