HP TeemTalk Terminal Emulator 8 E-License manual Telnet Settings, Terminal Id, Send Echo

Telnet Settings

The settings for a Telnet host connection are specified using the Telnet Settings dialog which can be displayed using one of the following three methods:

Using the Session Wizard

◦In Step 1 set Connection to Telnet then click Configure. Using the TeemTalk Window

◦On the Session menu, select Connection > Telnet then select Configure Connection....

◦On the configuration bar, click Configure Telnet.

Specify the settings required by the host using the options described below, then click the Connect button.

●Terminal Id

Factory default: Depends on the selected terminal emulation

This specifies the terminal identification string that is passed to the host.

●Send Echo

Factory default: Unchecked

When this option is unchecked the emulator is prevented generating the Telnet echo option on connection.

●Send CR with Break Factory default: Unchecked

This determines whether a Carriage Return is sent with a Telnet break packet.

●Send TM with Break

12 Chapter 3 Host Connection