Tab Settings
Clicking the Set Tabs... button at the bottom of the VT Series Settings dialog will display the Tab Settings dialog which enables you to set tab stops for the DEC VT, ANSI and SCO Console emulations.
Tab stops are set every eight columns by default, as indicated by the T character below the relevant column numbers. If you want tab stops to be set at regular intervals other than every 8th column, enter the number of columns required between each tab stop in the box next to the Set Every button, then click the button.
Individual tab stops can be toggled on or off by clicking the mouse pointer above or below the relevant column number.
To remove all the tab stops, click Clear All.
To save the current tab stops, select Save Session in the File menu.
Auxiliary Port Setup
This dialog is only available when VT Series emulation mode is selected and can be displayed by selecting Auxiliary Ports...from theFile menu. It enables you to specify a COM or LPT port for bidirectional output when in any VT Series emulation.
96 | Chapter 12 VT Series Emulation |