Factory default: WY50+

This specifies the particular terminal to emulate, as supported by Wyse WY-50/50+/60 terminals. Select from the following:

ADDS A2

Provides compatibility with software designed to drive the ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60 terminals.

HZ 1500

Provides compatibility with software designed to drive the Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals.

Stratus V102

Provides compatibility with software designed to drive the Stratus V102 terminal.

TVI910, TVI920 and TVI925

Provide compatibility with software designed to drive the TeleVideo 910+, 920 and 925 terminals, respectively, as emulated by the Wyse WY-50/ 50+/60 terminals.

TVI950 and TVI955

Provide compatibility with software designed to drive the TeleVideo 950 and 955 terminals, respectively.

WY50, WY50+ and WY60

Provide compatibility with software designed to drive the Wyse WY-50, WY-50+ and WY-60 terminals, respectively.

Wyse PCTerm

Provides compatibility with software designed for the PC Term personality supported by Wyse.

Font

Factory default: Courier New

This enables you to specify the font to use for displaying characters. The available settings depend on the fonts installed on your system.

Character set Factory default: Ascii

This specifies the character set used for displaying characters.

Ansi codepage

Factory default: PC Multinational (437)

This option determines the set of characters that form the second half of the multinational character set when in multinational mode.

Multiple page Factory default: Checked

224 Chapter 20 Wyse Emulations