Scroll rate Factory default: 24

This determines the number of lines that are scrolled when the Jump scroll option above is selected.

80/132 clears screen Factory default: Checked

This option determines whether or not data is cleared from the display when the number of columns is changed.

Use 80 column font Factory default: Unchecked

When this option is checked, the font used in 132 column writing mode will be the same as that used in 80 column mode.

Backspace = DEL Factory default: Unchecked

The setting of this option determines whether or not a backspace command performs a delete.

Printed data type

Factory default: All characters

The setting of this option determines the range of character sent to the printer. Select from All characters, Ascii characters, National only, Multinational + line drawing or National + line drawing.

Print extent

Factory default: Full page

The setting of this option determines the display area that will be printed with a print screen command. Select either Full page or the Scroll region.

Enable bi-directional printing Factory default: Unchecked

The setting of this option determines whether data from the printer can be transmitted to the host during print controller mode.

Setup Options

95