Wasp Bar Code WLS 8400 ER, WLS 8400 FZ manual Miscellaneous Default Parameters

9-4WLS 8400 Product Reference Guide

Scanning Sequence Examples

In most cases, only one bar code needs to be scanned to set a specific parameter value.

Parameters, such as Prefix Value, require that several bar codes be scanned in the proper sequence. See each individual parameter for descriptions of this procedure.

Errors While Scanning

Unless otherwise specified, if an error is made during a scanning sequence, re-scan the correct parameter.

Miscellaneous Default Parameters

Table 9-1lists the defaults for miscellaneous scanner options parameters. To change any option, scan the appropriate bar code(s) provided in the Miscellaneous Scanner Parameters section beginning on page 9-5.

See Chapter A, Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters.

Table 9-1. Miscellaneous Scanner Options Default Table

Parameter	Default	Page Number
Miscellaneous Scanner Options
Transmit Code ID Character	None	9-5
Scan Angle	Normal Angle	9-6
Prefix Value	7013 <CR><LF>	9-6
Suffix Value	7013 <CR><LF>	9-6
Scan Data Transmission Format	Data As Is	9-7
FN1 Substitution Values	Set FN1 Substitution	9-9
	Value
Transmit “No Read” Message	Disable No Read	9-9