Wasp Bar Code WLS 8400 ER, WLS 8400 FZ manual Scanning in Hand-Held Mode, 012345

2-6WLS 8400 Product Reference Guide

Scanning in Hand-Held Mode

Install and program the scanner (see Setting Up the Scanner on page 1-5). For assistance, contact the local supplier or Wasp Support.

1.Ensure the scanner is properly connected to the host (see the appropriate host chapter).

2.Aim the scanner at the bar code.

3.Press the scan trigger.

Figure 2-2. Scanning in Hand-Held Mode

4. Ensure the scan line crosses every bar and space of the symbol.

RIGHT WRONG

012345 012345

5.Upon successful decode, the scanner beeps, and the LED turns green. For more information on beeper and LED definitions, see Table 2-1and Table 2-2.