Miscellaneous Scanner Options 9-9
FN1 Substitution Values
The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. When enabled any FN1 character (0x1b) in an EAN128 bar code is substituted with a value. This value defaults to 7013 (Enter Key)
1. To select a FN1 Substitution Value, scan the bar code below.
Set FN1 Substitution Value
2.Look up the keystroke desired for FN1 Substitution in the ASCII Character Set table for the currently installed host interface. Enter the
3.To correct an error or change the selection, scan CANCEL.
To enable FN1 Substitution for Wedge, scan the Enable Keyboard Wedge FN1 Substitution bar code on page
To enable FN1 Substitution for USB HID Keyboard, scan the Enable USB Keyboard FN1 Substitution bar code on page
Transmit “No Read” Message
Scan a bar code below to select whether or not a “No Read” message is transmitted. When enabled, the characters NR are transmitted when a bar code is not decoded. When disabled, if a symbol does not decode, nothing is sent to the host.
