User Preferences 4-9
Trigger Mode (continued)Two Stage - Option 1
When the trigger is pulled, an aiming dot appears. This aiming dot remains while the trigger
is pulled. When the trigger is released, the aiming dot automatically turns into a standard
laser scanning beam for a full decode session. The laser scanning beam stays on until the
laser-on timeout occurs or a decode occurs. If the trigger is pulled again while in a decode
session, the scanner beam returns to an aiming dot.
Two Stage - Option 1
Two Stage - Option 2
When the trigger is pulled, an aiming dot appears. When the trigger is released, the aiming
dot turns off. Pulling the trigger twice in rapid succession turns on the standard laser
scanning beam for a full decode session. The laser scanning beam, stays on until the laser-
on timeout occurs, a decode occurs, or the trigger is released.
Two Stage - Option 2