Wasp Bar Code WLS 8400 ER Scanning in Hands-Free Mode, Inserting the Scanner in the IntelliStand

2-8WLS 8400 Product Reference Guide

Scanning in Hands-Free Mode

The optional IntelliStand adds greater flexibility to the scanning operation. When the scanner is seated in the stand’s “cup,” the scanner’s built-in sensor places the scanner in hands-free mode. When the scanner is removed from the stand it operates in its normal hand-held mode.

Adjust angle of scanner “cup”

Scanner “Cup”	Adjust height
	of IntelliStand

Figure 2-4. Inserting the Scanner in the IntelliStand

To operate the scanner in the IntelliStand:

1.Ensure the scanner is properly connected to the host (see the appropriate host chapter for information on host connections).

2.Insert the scanner into the IntelliStand by placing the front of the scanner into the stand’s “cup” (see Figure 2-4).

3.To scan a bar code, present the bar code and ensure the scan line crosses every bar and space of the symbol.

4.Upon successful decode, the scanner beeps and the LED turns green. For more information on beeper and LED definitions, see Table 2-1and Table 2-2.