Wasp Bar Code WLS 8400 FZ, WLS 8400 ER manual RS-232 Default Parameters, RS-232 Host Default Table

RS-232 Interface 6-5

RS-232 Default Parameters

Table 6-1lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s) provided in the Parameter Descriptions section beginning on page 6-6.

See Chapter A, Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters.

Table 6-1. RS-232 Host Default Table

Parameter	Default	Page Number
RS-232 Host Parameters
RS-232 Host Types	Standard RS-232	6-9
Baud Rate	9600	6-11
Parity	None	6-13
Check Receive Errors	Enable	6-13
Stop Bit Select	1 Stop Bit	6-14
Data Bits	8-Bit	6-14
Hardware Handshaking	None	6-16
Software Handshaking	None	6-18
Host Serial Response Time-out	Minimum: 2 sec	6-20
RTS Line State	Host: Low RTS	6-21
Beep on <BEL>	Disable	6-22
Intercharacter Delay	Minimum: 0 msec	6-23
Nixdorf Beep/LED Options	Normal Operation	6-24
Ignore Unknown Characters	Send Bar Code	6-25