Wasp Bar Code WLS 8400 FZ, WLS 8400 ER manual RS-232 Interface

RS-232 Interface 6-3

Introduction

This chapter provides RS-232 host information for setting up the scanner. The RS-232 interface is used to attach the scanner to point-of-sale devices, host computers, or other devices with an available RS-232 port (i.e., com port).

If the particular host is not listed in Table 6-2, set the communication parameters to match the host device. To set communication parameters for hosts not listed, refer to the documentation for the host device.

This scanner utilizes TTL RS-232 signal levels, which interfaces with most system architectures. Please contact Wasp Support for more information.

Throughout the programming bar code menus, default values are indicated with asterisks (*).

* Indicates Default * Baud Rate 9600 Feature/Option