Wasp Bar Code WLS 8400 FZ manual Special Commands, Pause Duration, Begin New Rule, Save Rule

Advanced Data Formatting 10-9

Special Commands

Pause Duration

This parameter along with the Send Pause parameter on page 10-33allows a pause to be inserted in the data transmission. Pauses are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar codes “0” and “1” inserts a 0.1 second pause; “0” and “5” gives a 0.5 second delay. Numeric bar codes begin on page D-1in Chapter D, Numeric Bar Codes. In case of an error, or to change the selection, scan Numeric Cancel on page D-6.

Pause Duration

Begin New Rule

Scan this bar code to start entering a new rule

.

Begin New Rule

Save Rule

Scan this bar code to save the entered rule.

Save Rule