Wasp Bar Code WLS 8400 ER, WLS 8400 FZ manual Setup Fields Definitions

10-32WLS 8400 Product Reference Guide

Setup Field(s)

Table 10-1. Setup Field(s) Definitions

Parameter	Description	Page
Move Cursor
Move Cursor To a Character	Scan the Move Cursor To Character bar code on page	10-33
	10-33, then any printable ASCII character from the
	Alphanumeric Keyboard. When this is used, the
	cursor moves to the position after the matching
	character. If the character is not there, the rule fails
	and ADF tries the next rule.
Move Cursor to Start of Data	Scan this bar code to move cursor to the beginning of the	10-33
	data.
Move Cursor Past a Character	This parameter moves the cursor past all sequential	10-33
	occurrences of a selected character. For example, if the
	selected character is ‘A’, then the cursor moves past ‘A’,
	‘AA’, ‘AAA’, etc. Scan the Move Cursor Past Character
	bar code on page 10-33,then select a character from the
	Alphanumeric Keyboard. If the character is not there, the
	cursor does not move (i.e., has no effect).
Skip Ahead “N” Characters	Scan one of these bar codes to select the desired number of	10-34
	positions to move the cursor ahead.
Skip Back “N” Characters	Scan one of these bar codes to select the desired number of	10-36
	positions to move the cursor back.
Send Preset Value	Send prefix and/or suffix value by scanning the appropriate	10-38
	bar code. These values must be set using the Scan Prefix
	and Scan Suffix bar codes on page 9-6.