5-4WLS 8400 Product Reference Guide

Connecting a Keyboard Wedge Interface

Male DIN Host

Y-cable

Keyboard

Female DIN Keyboard

Figure 5-1. Keyboard Wedge Interface Connection with Y-cable

To connect the keyboard wedge interface Y-cable:

Interface cables vary depending on configuration. The connectors illustrated in Figure 5-1are examples only. The connectors may be different than those illustrated, but the steps to connect the scanner remain the same.

1.Turn off the host and unplug the keyboard connector.

2.Attach the modular connector of the Y-cable to the cable interface port on the scanner. (See Installing the Interface Cable on page 1-5.)

3.Connect the round male DIN host connector of the Y-cable to the keyboard port on the host.

4.Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.

5.If required, attach the optional power supply to the connector in the middle of the Y-cable.

6.Ensure that all connections are secure.

Page 62
Image 62
Wasp Bar Code WLS 8400 ER manual Connecting a Keyboard Wedge Interface, Keyboard Wedge Interface Connection with Y-cable