Wasp Bar Code WLS 8400 ER, WLS 8400 FZ manual RS-232 Host Parameters, Terminal Specific RS-232

6-6WLS 8400 Product Reference Guide

RS-232 Host Parameters

Various RS-232 host types are set up with their own parameter default settings. Selecting the host type sets the parameter defaults as listed in Table 6-2.

Table 6-2. Terminal Specific RS-232

	Standard		Wincor-	Wincor-
	RS-232		Nixdorf	Nixdorf			OPOS/
Parameter	(Default)	ICL	Mode A	Mode B	Olivetti	Omron	JPOS	Fujitsu
Transmit	No	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Code ID
Data	Data as is	Data/	Data/	Data/	Prefix/	Data/	Data/	Data/
Transmission		Suffix	Suffix	Suffix	Data/	Suffix	Suffix	Suffix
Format					Suffix
Suffix	CR/LF	CR (1013)	CR (1013)	CR (1013)	ETX	CR (1013)	CR (1013)	CR (1013)
	(7013)				(1002)
Baud Rate	9600	9600	9600	9600	9600	9600	9600	9600
Parity	None	Even	Odd	Odd	Even	None	Odd	None
Hardware	None	RTS/CTS	RTS/CTS	RTS/CTS	None	None	RTS/CTS	None
Hand-		Option 3	Option 3	Option 3			Option 3
shaking
Software	None	None	None	None	Ack/Nak	None	None	None
Hand-
shaking
Serial	2 Sec.	9.9 Sec.	30.0 Sec.	30.0 Sec.	9.9 Sec.	9.9 Sec.	30.0 Sec.	2 Sec.
Response
Time-out
Stop Bit	One	One	One	One	One	One	One	One
Select
ASCII	8-Bit	8-Bit	8-Bit	8-Bit	7-Bit	8-Bit	8-Bit	8-Bit
Format
Beep On	Disable	Disable	Disable	Disable	Disable	Disable	Disable	Disable
<BEL>
RTS Line	Low	High	Low	Low = No	Low	High	Low = No	Low
				data to			data to
State				send			send
Prefix	None	None	None	None	STX	None	None	None
					(1003)