Wasp Bar Code WLS 8400 FZ manual Rule 1 The Code 128 Scanning Rule, Rule 2 The UPC Scanning Rule

Advanced Data Formatting 10-5

Rule 1: The Code 128 Scanning Rule

Step	Bar Code	On Page	Beep Indication
1	Begin New Rule	10-9	High High
2	Code 128	10-13	High High
3	Send next 5 characters	10-29	High High
4	Send <CTRL M>	10-56	High High
5	Send next 5 characters	10-29	High High
6	Send <CTRL P>	10-57	High High
7	Send next 2 characters	10-28	High High
8	Send <CTRL D>	10-55	High High
9	Save Rule	10-9	High Low High Low

Rule 2: The UPC Scanning Rule

Step	Bar Code	On Page	Beep Indication
1	Begin New Rule	10-9	High High
2	UPC/EAN	10-15	High High
3	Send all remaining data	10-28	High High
4	Send <CTRL M>	10-56	High High
5	Save Rule	10-9	High Low High Low

In case of errors while entering this rule, scan the Quit Entering Rules bar code on page 10-10.If the rule is already saved, scan the Erase Previously Saved Rule bar code on page 10-10.

Alternate Rule Sets

ADF rules may be grouped into one of four alternate sets which can be turned on and off when needed. This is useful to format the same message in different ways. For example, a Code 128 bar code contains the following information:

Class (2 digits), Stock Number (8) digits, Price (5 digits)

This bar code might look like this:

245671243701500