Parameter | Description | Possible values |
IGNOREERRORS | Causes the installation to continue and | ServerNotFound, BadPassword, |
| ignore errors. | FailedDependencies |
The ServerNotFound option can be used to bypass inactive or unavailable remote hosts when deploying firmware or software to multiple remote hosts at the same time.
Use FailedDependencies to ignore any failed dependencies and proceed with the ones that are ready to be installed.
SOURCEPATH | Provide a single local repository path. This | Directory path |
| action creates an inventory from the given |
|
| path instead of the local or default |
|
| repository. |
|
USELATEST | This is a filter switch for use with bundles. | YES, NO |
| The parameter enables you to use the latest |
|
| version of the bundle when multiple versions |
|
| of bundles are listed on the command line. |
|
If no bundles are specified on the command line, and multiple bundles are in the directory, this parameter enables HP SUM to use the bundle that has the latest version for installation.
DRYRUN | Simulates the installation for a test run. | YES, NO |
| Nothing is installed. |
|
OPTIONS | Specify the HP SUM CLI options inside the | One or more CLI switch |
| input file, which overrides the configuration |
|
| settings. Parameters can be separated by a |
|
|
| |
| This parameter replaces the LSPOPTIONS |
|
| parameter that was previously supported |
|
| with LDU. |
|
USESNMP | Specifies that components that use SNMP | YES, NO |
| protocol, are available to be selected for |
|
| installation. |
|
| These components are available for selection |
|
| by default. When the /usesnmp parameter |
|
| is used, and the /usewmi parameter is not |
|
| used, the WMI components are optional. |
|
| This parameter does not apply to HP Integrity |
|
| servers. |
|
USEWMI | Specifies that components that use WMI | YES, NO |
| protocol are available to be selected for |
|
| installation. |
|
| These components are optional by default |
|
| and are not installed unless this parameter |
|
| is used. When the /usewmi parameter is |
|
| used, and the /usesnmp parameter is not |
|
| used, the SNMP components are optional. |
|
| This parameter does not apply to HP Integrity |
|
| servers. |
|
ROMONLY | This is a filter switch that allows you to view | YES, NO |
| only the firmware components required for |
|
| installation. |
|
| Do not use the /romonly parameter with |
|
| the /softwareonly parameter. |
|
