Installation options | Description |
|
|
default repository and may downgrade drivers and firmware to the versions in the default directory as part of the installation operation. The express installation feature allows you to set a baseline and enforce it regardless of the currently installed version of drivers and firmware on the local server.
Overriding errors | Description |
|
|
/tpmbypass or /ignore_tpm | Specifies that if a TPM is enabled, the warning message |
| should be ignored and component installation can continue. |
| For more information about TPM, see the HP Smart Update |
| Manager User Guide. |
|
|
/ignore_warnings | Allows the installation to proceed on a Superdome 2 target |
| even when warnings are returned during analysis. |
|
|
/continue_on_error <error> | Causes the installation to continue and ignore errors. Valid |
| values are as follows: |
| * <error>=ServerNotFound and |
| * <error>=BadPassword. |
| * <error>=FailedDependencies |
| You can use the ServerNotFound option to bypass |
| inactive or unavailable remote hosts when you are |
| deploying firmware or software to multiple remote hosts at |
| the same time. |
|
|
/override_existing_connection | Defines the behavior when a remote target has an existing |
| HP SUM session in progress. It overrides the session in |
| progress and |
| the remote host. |
|
|
/On_failed_dependency: <parameter> | Provides HP SUM <parameter> the information on how to |
| proceed when a component has a failed dependency. The |
| supported parameters for this argument are Omit_Host |
| (default), Omit_Component , and Force. Omit_Host |
| causes the host to be put into a failure state, and no |
| installation is attempted. Omit_Component deselects the |
| affected components and proceeds with any updates that |
| do not have dependency failures. Force attempts all |
| updates, even if they have dependency failures. |
|
|
/partition_only | Use this argument to select a partition to update. |
|
|
/oa_name and /oa_password | Use these arguments if you do not use the |
| /partition_only argument. If you do not enter the |
| selections, then the update will display and error and exit. |
|
|
|
|
Reboot options | Description |
|
|
/r[eboot] | If the following conditions are met, this argument causes |
| the server (or host server in a remote installation) to reboot: |
| • The /reboot option is selected or given as a |
| |
| • All components selected for installation are successfully |
| installed. |
| • At least one of the installed components requires a |
| reboot to complete its installation. |
|
|
/reboot_message "reboot message" | Displays the specified reboot message on remote consoles |
| connected to the server that you want to reboot. You must |
|
|
22 Advanced topics