Installation options
/use_web
/use_proxy <Proxy server>
/proxy_script <Proxy script>
/proxy_password<password>
/use_d[ownloaded]
/use_snmp
/use_wmi
/use_ams
/romonly
/softwareonly
/express_install
Description
The /user and /passwd arguments do not have any effect when you are attempting to access the file share. Use those arguments only when you are connecting to a target system.
Specifies that the check box for Check ftp.hp.com on the Source Selection screen is selected. This enables components to be retrieved from ftp.hp.com and used in the list of possible updates.
Enables the inclusion of a proxy server (and port number) to access ftp.hp.com. This parameter must be used with /use_web. For example, /use_web /use_proxy
<1.22.33.44:80>.
Enables the inclusion of a proxy script to access ftp.hp.com. This parameter must be used with /use_web. For example, /use_web /proxy_script <autoproxy.com>.
Sets the password to be used for an authenticating proxy server.
Specifies that the check box for Use last downloaded repository from ftp.hp.com on the Source Selection screen in the GUI is selected. This enables the previously downloaded components to be included in the list of possible updates.
Specifies that components that use SNMP protocol and the AMS components are available for installation by default. When the /use_snmp argument is used, the AMS components are required, but the WMI components are optional.
Specifies that components that use the WMI protocol are available for installation. These components are optional and are not installed unless this argument is used. When the /use_wmi argument is used, and the /use_snmp & /use_ams arguments are not, the SNMP and AMS components are optional. This argument does not apply to HP Integrity servers.
Specifies which AMS components can be installed along with SNMP components. The AMS and SNMP components are available to select by default. When the /use_ams argument is used, the SNMP components are required, and the WMI components are optional.
This filter switch allows you to see only the firmware components needed for installation. When you are using this filter switch, you must exit and restart HP SUM if you want to return to an unfiltered state.
Do not use the /romonly argument with the /softwareonly argument. (Applies to firmware only.)
This filter switch allows you to see only the software components needed for installation. When you are using this filter switch, you must exit and restart HP SUM if you want to return to an unfiltered state.
Do not use the /softwareonly argument with the /romonly argument.
Starts an express installation (for the local host only). The HP SUM performs discovery, installation, or exit without user interaction. You can cancel or terminate HP SUM. An express installation will force install all components in the
