C2SBA+II/C2SBA+/C2SBA/C2SBE User's Manual
Serial ATA
This setting allows the user to enable or disable the function of the Serial ATA. The options are Disabled and Enabled.
Native Mode Operation
Select Serial ATA for SATA or select Auto (Native Mode) for ATA. The options are: Serial ATA and Auto.
Serial ATA (SATA) RAID Enable (C2SBA+II Only)
Select Enable to enable Serial ATA RAID Functions. (For the Windows OS environment, use the RAID driver if this feature is set to Enabled. When this item is set to Enabled, the item: "ICH RAID Code Base" will be available for you to select either Intel or Adaptec Host RAID firmware. If this item is set to Disabled, the item- SATA AHCI Enable will be available.) The options are Enabled and Disabled.
SATA AHCI Enable
Select Enabled to use the Serial ATA Advanced Host Interfacing. This feature is available when the Windows XP OS, the SPI BIOS Chip, and the IAA Driver are installed in the system. (Take caution when using this function. This feature is for advanced programmers only. The options are Enabled and Disabled.)
SATA AHCI Legacy Enable
Select Enabled use the SATA Advanced Host Interface Legacy Mode. When in AHCI Legacy Mode, SATA Port 5 and SATA Port 6 are disabled. (Take caution when using this function. This feature is for advanced programmers only. The options are Enabled and Disabled.)
SATA Port1, SATA Port2, SATA Port3, SATA Port4 and SATA 5
These settings allow the user to set the parameters of slots indicated above. Hit <Enter> to access the following
