SUPER MICRO Computer C2SBE, C2SBA+II user manual C-11

Appendix C: Intel HostRAID Setup Guidelines

C-3 Installing the Windows XP/2000/2003 OS for Systems without RAID Functions

1.Insert Microsoft's Windows XP/2000/2003 Setup CD in the CD Driver, and the system will start booting up from CD.

2.Press the <F6> key when the message-" Press F6 if you need to install a third party SCSI or RAID driver" displays.

3.When the Windows XP/2000/2003 Setup screen appears, press "S" to specify additional device(s).

4.Insert the driver diskette-"ITE RAID XP/2000/2003 Driver for IDE" into Drive

A: and press the <Enter> key.

5.Press the <Enter> key to proceed with the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are specified, press the <Enter> key to continue with the installation.

6.From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The XP/2000/2003 Setup will automatically load all device files and then continue with the Windows XP/2000/2003 installation.

7.After the Windows XP/2000/2003 OS Installation is completed, the system will automatically reboot.

8.Insert the Supermicro Setup CD that came with your motherboard into the CD Drive during system boot, and the main screen will display.

C-11