Fan Headers, VGA Connector | SUPER MICRO Computer C2SBA, C2SBE

Chapter 2: Installation

Fan Headers

The C2SBA+II/C2SBA+/C2SBA/C2SBE has five chassis fan headers (Fan 1 to Fan 5). Fan 1 is the CPU Fan. Fan 2 to Fan 5 are system/chassis fans. (Note: Pins 1-3 of a 4-pin fan headers are backward compatible with the traditional 3-pin fans.) See the table on the right for pin definitions. The onboard fan speeds are controlled by Thermal Management via BIOS Hardware Monitoring in the Advanced Setting. (Note: Default: Disabled. When using Thermal Management settings, please use all 3-pin fans or all 4-pin fans on the motherboard.)

Fan Header

Pin Definitions

Pin# Definition

1Ground

2+12V

3Tachometer

4PWR Modulation

VGA Connector

(Not available on the C2SBE)

A VGA connector (JG1) is located next to the USB ports on the IO backplane. Refer to the board layout below for the location.

KB/MOUSE

JKB

COM1
	Parallel Port
VGA	F
	F

USB 3/4/5/6
USB 1/2	LAN

	CPU Fan	A
4-Pin PWR	FAN1	A
	Processor
		DIMM1A
	Intel G33

JPUSB1

Audio	Fan5	E
		North Bridge
		Slot7 PCI-E x1

FAN2	B
		S I/O W83627DHG
DIMM2A DIMM1B	DIMM2B	24-pin ATX PWR
		Floppy

A. Fan 1 (CPU Fan)

B. Fan 2

C. Fan 3

D. Fan 4

E. Fan 5

C2SBA

	Slot6 PCI-E x16
GLAN CTRL
	Slot5 PCI-E x4		JBT1
			JBT1
	JI2C1	JWOR	JPL1
	JI2C2	JWOR	JPL1
Audio CTRL
JP5	Slot4 PCI-33MHz
JP5	Audio Enabled
CD-IN	Slot3 PCI-33MHz		JP2

Intel ICH9(R)

South Bridge

BIOS

			Battery
	I-SATA2		JP3
			JWD
	I-SATA3		JLED	FAN3
	I-SATA3
	I-SATA0	I-SATA4
	I-SATA0	I-SATA4		FAN4
				FAN4
	I-SATA1	I-SATA5		CTRL
			LE1	CTRL
FP USB 7/8	FP USB 9/10		LE1	Panel
FP USB 7/8	FP USB 9/10			Panel
				Front

C

D

F. VGA

	Slot2 PCI-33MHz
Front Audio		Speaker	IDE CTRL
Front Audio		Speaker	ITE 8212 JPUSB2
			ITE 8212 JPUSB2
COM2	Slot1 PCI-33MHz	Buzzer
		Buzzer
		SPKR1	WOL

	JL1
Front-Access USB 12	Front-Access USB 11
IDE#2
IDE#1

2-15

Image 35

SUPER MICRO Computer C2SBA+II user manual Fan Headers, VGA Connector, Not available on the C2SBE, Fan 1 CPU Fan

Contents

C2SBA+II C2SBA C2SBE Page Conventions Used in the Manual About This Manual Manual Organization Table of Contents Table of Contents Troubleshooting Appendices BiosIntroduction Running Setup Advanced Setup Overview Checklist Asia-Pacific Contacting Super MicroHeadquarters Europe C2SBA+II/C2SBA+/C2SBA/C2SBE Image Motherboard Layout Please see important notes on All notes indicated above are listed on Jumpers Description Default SettingC2SBA+II/C2SBA+/C2SBA/C2SBE Quick Reference Overclocking Considerations Important Notes to the User Motherboard Features CD Utilities DimensionsOnboard I/O Other Intel G33/P35 Chipset System Block Diagram Graphic Memory Controller Hub Gmch Intel ICH9/ICH9R System FeaturesChipset Overview PC Health Monitoring Recovery from AC Power LossAcpi Features Enhanced Power Management Wake-On-LAN WOL Power SupplySlow Blinking LED for Suspend-State Indicator Bios Support for USB Keyboard Virtualization Technology VT-d Versatile Media CapabilitiesSuper I/O High Definition Audio C2SBA+II/C2SBA+/C2SBA/C2SBE User’s Manual Unpacking Motherboard InstallationPrecautions Static-Sensitive Devices Installation of the LGA 775 Processor Processor and Heatsink Fan Installation Tally or vertically. Do not rub the CPU CPU Installation of the Heatsink Heatsink Removal Memory Support Installing DIMMsDimm Installation Possible System Memory Allocation & Availability Installing and Removing DIMMs Back Panel Connectors/IO Ports Control Panel Connectors/IO Ports Front Control Panel JF1 Header Pins LEDAnode+ Front Control Panel Pin Definitions Power LEDPower LED Pin Definitions APower LED Overheat/Fan Fail LED OH NIC1 IndicatorOH/Fan Fail Indicator Status Power LED Power Button Pin Definitions Reset ButtonPower Button Reset Button Pin Definitions ATX Power 24-pin Connector Pin Definitions Connecting CablesATX Main Power Connector Pin CPU Power Connector Front Panel USB 7/8 Front Panel USB 9/10 Universal Serial Bus USBChassis Intrusion Back panel USB Ports 1/2 Back panel USB Ports 3/4/5/6 Fan 1 CPU Fan VGA ConnectorFan Headers Not available on the C2SBE PS/2 Keyboard Mouse Port Pin Definitions ATX PS/2 Keyboard and PS/2 Mouse PortsSerial Ports Keyboard/Mouse Wake-On-LAN Pin Definitions Wake-On-RingWake-On-LAN Wake-On-Ring Pin Definitions Speaker/Buzzer Speaker Connector Pin DefinitionsGlan 1 Giga-bit Ethernet Port Speaker CD1 Pin Definition High Definition Audio HDACD Header HD Audio CD-In Front Panel Audio Front Panel Audio Control High Definition Front Panel Audio Pins# Signal Glan Enable Jumper Settings Jumper SettingsGlan Enable/Disable Glan Port1 Enable Cmos Clear Watch Dog Enable/DisableClear Cmos Watch Dog Enable Watch Dog Jumper Settings Keyboard Wake-Up SMBus to PCI-X/PCI-Exp Slots Jumper SettingsKB Wake-up Enable Jumper Settings PCI/PCI-E Slots to SMB Speeds IDE Enable Jumper Settings IDE Enable/DisableTPM Enable For the C2SBA/C2SBA+II/C2SBA+ IDE Enable B. TPM Enable Audio Enable Jumper Settings Audio EnableAudio Enable USB Wake-Up USB Wake-up Enable Jumper Settings Glan Port1 LEDs Onboard IndicatorsGlan LEDs Glan Link/Speed LED Glan Activity LED Settings Onboard Power LED LE1Power LED Parallel Port ConnectorParallel Port, Floppy Drive and IDE Hard Drive Connections Parallel Printer Port Floppy Floppy Connector IDE#1 IDE#2 IDE Connectors For the C2SBA+II/C2SBA+ onlyPage No Video Troubleshooting ProceduresBefore Power On No Power Losing the System’s Setup Configuration Technical Support ProceduresMemory Errors Question What type of memory does my motherboard support? Frequently Asked Questions Question How do I utilize the onboard HD sound? Question Whats on the CD that came with my motherboard? Returning Merchandise for Service Page Introduction System BiosHow To Change the Configuration Data Starting the Setup Utility Main Bios Setup Running Setup Main Setup Features Main Bios Setup Menu Sata Ahci Legacy Enable Native Mode OperationSerial ATA Sata RAID Enable C2SBA+II Only Sata Ahci Enable CHS Format Type Installed Memory LBA Mode ControlTransfer Mode Ultra DMA Mode Advanced Setup High Precision Event Time Acpi Sleep ModePower Button Behavior Power Loss Control Core-Multi-Processing Available when supported by the CPU CPU Overclocking Available when supported by the CPUCPU OverVoltage Available when supported by the CPU Memory OverVoltage Available when supported by the CPU C1 Enhanced Mode Available when supported by the CPU Fast String Operations Available when supported by the CPUCompatible FPU Code Available when supported by the CPU Thermal Management 2 Available when supported by the CPU Integrated Device Control Sub-menu USB Host Controller Clock Spectrum FeatureAdvanced Chipset Control Memory Reclaiming Enable VT-dDefault Primary Video Adapter Dvmt 4.0 Mode Cache Base 0-512K Memory Cache Cache System Bios AreaCache Video Bios Area Route Port 80h Cycles to Cache Extended Memory Area PCI Device Slot#1 PCI Device Slot#4 PNP ConfigurationEnable Master Latency Timer PEG PCI-Express Graphics Port Submenu IDE RAID Mode Available on the Onboard PCI IDE SubmenuPCI-E x1 Slot PCI Express Port#1 PCI Express Port#5 Base I/O Address I/O Device ConfigurationKBC Clock Input Serial Port a Floppy Disk Controller CPU Overheat AlarmCPU1 Temperature DMA ChannelPage Fan Speed Control Modes System TemperatureVoltage Monitoring Fan1 Fan Set Supervisor Password Security SettingsSupervisor Password Is User Password Is TPM Trusted Platform Modules Support Fixed Disk Boot SectorPassword on Boot Change TPM State TPM Trusted Platform Modules StateCurrent TPM State Boot Priority Order/Excluded from Boot Orders Boot Settings Exit Failure Fixed Disk Keyboard errorKeyboard locked Unlock key switch Monitor type does not match Cmos Run Setup Check date and time settings System Cmos checksum bad Default configuration usedSystem timer error Real time clock error Entering Setup System cache error Cache disabledFail-Safe Timer NMI Failed Allocation Error for device Nnnn kB Extended RAM Passed Invalid System Configuration DataPS/2 Mouse Boot Summary Screen Device IRQ conflict System Bios shadowed Press F1 to resume, F2 to Setup, F3 for previousPress F2 to enter Setup Run the I2O Configuration UtilityPage Post Code Description Recoverable Post ErrorsTerminal Post Errors Memory bus Post Code Description Post Code Description Following are for boot block in Flash ROM Page Introduction to the Intel ICH9R Serial RAID Introduction to Serial ATA and Parallel ATAFor the C2SBA+II Only Serial ATA Sata Intel Matrix Storage Intel HostRAID Configurations Creating, Deleting and Resetting RAID Volumes Using the Intel ICH9R Sata RAID Utility Program Creating a RAID 0 Volume Creating a RAID 1 Volume Creating a RAID 10 RAID 1+ RAID Creating a RAID 5 Set Parity Deleting a RAID Volume Resetting to Non-RAID and Resetting a RAID HDD Page Appendix C Intel HostRAID Setup Guidelines Page Introduction to the Intel ICH9R Controller Hub Examples of Valid RAID ConfigurationsExamples of Invalid RAID Configurations Serial ATA SataPage Adaptec Embedded Serial ATA with HostRAID Controller Driver Using the Adaptec RAID Configuration Utility ARCUsing the Array Configuration Utility ACU Managing Arrays To configure a disk drive Configuring Disk DrivesPage Page To create an array Creating Arrays Assigning Array Properties Page Deleting a Bootable Array Adding a Bootable Array Adding/Deleting Hotspares Page To Rebuild an array Rebuilding Arrays Deleting Arrays To access the disk utilities Using the Disk Utilities To format a disk To verify disk media Page Installing the Intel ICH9R Driver by Adaptec and the OS Driver/Tool Installation Display Screen Installing Drivers Configuring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control