SUPER MICRO Computer C2SBE, C2SBA+II user manual To format a disk

Appendix D: Adaptec HostRAID Setup Guidelines

To format a disk:

Note: The operation of Formatting Disk allows you to perform a low-level format- ting of a hard drive by writing zeros to the entire disk. Serial ATA drives are low-level formatted at the factory and do not need to be low-level formatted again.

3.When the screen shown below displays, select Format Disk and press <Enter>.

The following screen appears:

4.Read the warning message when it appears in the screen as shown below. To continue with disk formatting, select Yes and hit <Enter>. Otherwise, select No and press <Enter>.

Caution: Formatting a disk destroys all data on the drive. Be sure to back up your data before formatting a disk.

D-17