Notice Board Settings●Notice Board Enabled Factory default: Checked

When this option is checked, pressing the Zoom key will toggle the display between full screen (i.e. the screen currently containing the cursor) and split screen (host screen and Notice Board) mode. The following Zoom Settings options determine which is displayed above the other. Note that the host screen contains the same number of rows and columns whether displayed full screen or in split screen.

●Zoom Settings

Factory default: Notice Board Above Host

This determines whether the Notice Board is displayed above or below the host screen. When viewing the display, pointers at each end of the dividing line between the two screens indicate which is the host screen.

●Copy to F-Key Enabled Factory default: Unchecked

This enables the facility for copying screen data to a function key. Refer to the section Copying Screen Data to a Function Key on page 150 for details.

●F-Key Settings

Factory default: Copy Only User Fields to F-Key

Selecting Copy Only User Fields to F-Keywill enable only data contained in user entry fields in the selected area to be copied to a function key.

Selecting Copy All Data to F-Keywill enable all screen data in the selected area (protected and unprotected) to be copied.

160 Chapter 15 IBM 3270 Display Emulation