HP TeemTalk Terminal Emulator 8 E-License manual IBM 3151 Emulation

14 IBM 3151 Emulation

This chapter describes features of the IBM 3151 terminal emulation.

Creating a IBM 3151 Emulation Session

You can create a session either using the TeemTalk Session Wizard or while TeemTalk is running.

Using the TeemTalk Session Wizard

This section describes how to use the TeemTalk Session Wizard to create an IBM 3151 emulation session.

1.To run the TeemTalk Session Wizard from the Start menu, select All Programs > HP > HP TeemTalk Terminal Emulator > Session Wizard.

2.In the Session Name field, enter a unique name that will identify this session configuration for future selection.

3.Select the Transport method then click the Configure button to specify settings.

4.Select the Connection type then click the Configure button to specify settings.

5.Select IBM 3151 in the Emulation list box then click the Configure button to specify settings. (The options are described in the section Setup Options on page 128.)

6.Click Next to display the Advanced Options dialog.

7.Click Next to display the Finalization dialog.

8.If you want a shortcut icon for this session to be created on the desktop, click the checkbox Create icon on desktop for session.

9.Click OK to create the session and exit.

10.To run the session, either double-click on the desktop icon if one was created for the session, or run TeemTalk, display the File menu and select Open Session. Select the name of the required .tts session file then click Open.

Using the TeemTalk Emulator Window

This section describes the procedure for creating a IBM 3151 emulation session from the TeemTalk emulator window.

1.Display the Session menu from the menu bar and select Transport... to set the transport method.

2.Display the Session menu and select Connection... to set the connection method.

3.Display the Session menu and select Emulation.... Set the emulation to IBM 3151.

Creating a IBM 3151 Emulation Session 121