●TeemTalk configuration bar:
●TeemTalk Session menu:
The Transport setting specifies the physical method by which the host connection is made. TeemTalk supports four transport protocols for communication with the host:
●TCP/IP
For host communication using the internet protocol suite TCP (Transport Control Protocol) and IP (Internet Protocol). See TCP/IP Transport on page 13.
●SSH2
A secure shell client/server protocol used to encrypt and transmit data securely over a network, with authentication provided by a password and/or key. See SSH2 Transport on page 13.
●Serial
For host communication requiring data to be sent sequentially, one bit at a time, see Serial Transport on page 30.
●SSL
For host connection using the Secure Sockets Layer protocol to encrypt communications and validate the host/client. See SSL Transport on page 26.
The Connection setting specifies the host connection protocol. Currently only Telnet is supported.
TeemTalk also provides an Auto Logon feature which enables you to automate all or part of the host logon procedure by specifying what is sent to the host in response to prompts displayed on the screen. See Auto Logon on page 32.
Introduction 11