NVT mode displays an unformatted screen for data entry, allowing basic keyboard functionality as a simple ASCII terminal. In addition to data keys, other recognized keys are:

Clear

clears the screen

Enter

sends CR to the host

Newline

sends CR to the host

Backspace

sends BS to the host

Tab

sends HT to the host

Once the appropriate details have been entered to establish an IBM host session (which may be automatic), the screen is cleared and switched into full IBM 5250 terminal emulation mode, as indicated by the following symbol on the status line:

The Status Line

The last line of the IBM 5250 screen is used to display status information in the form of symbols and alphanumeric characters.

Operating Mode & Communication

Indicates that a Telnet session is running.

Indicates that the current screen is an IBM 5250 screen. This screen will be displayed when you have initiated a Telnet session with the host.

Indicates that the system has one or more messages waiting for you.

Do Not Enter

Indicates when input from the keyboard or mouse will not be accepted by the host. When this

is because an error has occured, as shown in the error line, pressing the Reset key will remove the error. Alternatively, more information can be obtained by pressing the Help key. The only other keys available are Attn, SysReq and Print. Note that the emulation includes typeahead capability so that

176 Chapter 17 IBM 5250 Display Emulation