Recording Keystrokes

The following procedure describes how to record keystrokes.

1.Press Record to enter Record mode.

The status line will display RECRD and a number from 0-1500indicating the number of new keystrokes that may be stored. A series of boxes displayed to the right represent the Fn keys. A solid box indicates that the Fn key in that position is currently storing recorded keystrokes.

2.Press the Fn key that will store the keystrokes. (On 101/102 keyboards you can also use Shift + Fn.)

The status line will display R**** F* where R indicates you are in Record mode, **** is the number of keystrokes that may be stored, and F* is the number of the Fn key pressed.

NOTE: If you press a pre-recorded Fn key, its contents will be replaced with the following keystrokes. You can also remove the contents of the Fn key before recording by pressing the Delete key.

3.Enter the keystrokes to be recorded.

You may pause recording at any time to allow keystrokes to be entered manually when played back by pressing Pause. To continue recording, press Pause again.

NOTE: You can cancel the newly recorded keystrokes by pressing the Quit key. This cancellation does not affect the previously recorded keystrokes.

4.To finish and save the recording, press the Record key.

Record & Playback Keystrokes Facility 147