Juniper Networks EX4200 manual Front Panel of an EX3200 Switch

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

Front Panel of an EX3200 Switch

The front panel of an EX3200 switch consists of the following components:

■10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled for Power over Ethernet (PoE)

■Uplink module ports—SFP, SFP+, or XFP ports (The uplink module is an optional feature.)

■LCD panel and the LCD navigation buttons

■Chassis status LEDs

■Network port LEDs

Figure 1 on page 8 shows the front panel of an EX3200 switch with 48 Gigabit Ethernet ports. Figure 2 on page 8 shows the front panel of an EX3200 switch with 24 Gigabit Ethernet ports. Models are available that have either all ports equipped for Power over Ethernet (PoE) or only 8 ports equipped for PoE. All ports have 10/100/1000Base-T Gigabit Ethernet connectors.

Figure 1: EX3200 Switch with 48 Gigabit Ethernet Ports

Figure 2: EX3200 Switch with 24 Gigabit Ethernet Ports

Related Topics ■

■

■

■

■

■

Chassis Status LEDs in EX3200 Switches on page 17

Rear Panel of an EX3200 Switch on page 9

Network Port LEDs in EX3200 and EX4200 Switches on page 20

Network Port Connector Pinout Information for an EX3200 or EX4200 Switch on page 40

LCD Panel in EX3200 and EX4200 Switches on page 13

Installing and Removing EX3200 and EX4200 Switch Hardware Components on page 129

8■ Front Panel of an EX3200 Switch