Table of Contents
| Disconnecting a Virtual Chassis Cable from an EX4200 Switch | 180 |
| Replacing a Member Switch of a Virtual Chassis Configuration (CLI |
|
| Procedure) | 182 |
| Remove, Repair, and Reinstall the Same Switch | 182 |
| Remove a Member Switch, Replace with a Different Switch, and Reapply |
|
| the Old Configuration | 182 |
| Remove a Member Switch and Make Its Member ID Available for |
|
| Reassignment to a Different Switch | 183 |
Part 5 | Switch and Component Maintenance |
|
Chapter 14 | Routine Maintenance | 187 |
| Maintaining | 187 |
Part 6 | Troubleshooting Switch Components |
|
Chapter 15 | Troubleshooting Switch Components | 191 |
| Troubleshooting Network Interfaces on EX3200 and EX4200 Switches | 191 |
| The interface on one of the last four |
|
| switch (for example, interface | 191 |
| The interface on the port in which an SFP or SFP+ transceiver is installed |
|
| in an SFP+ uplink module is down | 192 |
| Troubleshooting Uplink Module Installation or Replacement on EX3200 and |
|
| EX4200 Switches | 192 |
| Virtual Chassis port (VCP) connection does not work | 192 |
| One of the last four network ports on an EX3200 switch with an SFP or |
|
| SFP+ uplink module installed is disabled | 193 |
Part 7 | Returning Hardware |
|
Chapter 16 | Returning the Switch or Switch Components | 197 |
| Returning an EX3200 or EX4200 Switch or Component for Repair or |
|
| Replacement | 197 |
| Locating the Serial Number on an EX3200 or EX4200 Switch or |
|
| Component | 198 |
| Listing the Switch and Components Details with the CLI | 198 |
| Locating the Chassis Serial Number ID Label on an EX3200 or EX4200 |
|
| Switch | 198 |
Table of Contents | ■ | xi |
