Chapter 20: Power and Electrical Safety Information
or foam packing material or if you move components across plastic or carpets. Observe the following guidelines to minimize the potential for electrostatic discharge (ESD) damage, which can cause intermittent or complete component failures:
■Always use an ESD grounding strap when you are handling components that are subject to ESD damage, and make sure that it is in direct contact with your skin.
If a grounding strap is not available, hold the component in its antistatic bag (see Figure 76 on page 237) in one hand and touch the exposed, bare metal of the switch with the other hand immediately before inserting the component into the switch.
WARNING: For safety, periodically check the resistance value of the ESD strap. The measurement must be in the range of 1 through 10 Mohms.
■When handling any component that is subject to ESD damage and that is removed from the chassis, make sure the equipment end of your ESD strap is attached to the ESD point on the chassis.
If no grounding strap is available, touch the exposed, bare metal of the switch to ground yourself before handling the component.
■Avoid contact between the component that is subject to ESD damage and your clothing. ESD voltages emitted from clothing can damage components.
■When removing or installing a component that is subject to ESD damage, always place it
Figure 76: Place a Component into an Antistatic Bag
CAUTION:
Prevention of Electrostatic Discharge Damage on EX Series Switches ■ 237