Juniper Networks EX3200 manual Front Panel of an EX4200 Switch

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

■Connecting Earth Ground to an EX Series Switch on page 141

■Installing and Removing EX3200 and EX4200 Switch Hardware Components on page 129

Front Panel of an EX4200 Switch

The front panel of an EX4200 switch consists of the following components:

■Network ports—depending on the switch model, either of:

■10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled for Power over Ethernet (PoE)

■100Base-FX/1000Base-X SFP ports for use with fiber-optic connections

■Uplink module ports—SFP, SFP+, or XFP ports (The uplink module is an optional feature.)

■LCD panel and the LCD navigation buttons

■Chassis status LEDs

■Network port LEDs

Figure 4 on page 10 shows the front panel of an EX4200 switch with 48 Gigabit Ethernet ports. Figure 5 on page 10 shows the front panel of an EX4200 switch with 24 Gigabit Ethernet ports. Figure 6 on page 11 shows the front panel of an EX4200-24F switch with 24 SFP ports for use with fiber-optic connectors.

Figure 4: EX4200 Switch with 48 Gigabit Ethernet Ports

Figure 5: EX4200 Switch with 24 Gigabit Ethernet Ports

10■ Front Panel of an EX4200 Switch