Switching the projector on/off
Power cord
| Connecting |
| Disconnecting |
1. | Make sure the shape of | 1. | Make sure the MAIN POWER is switched off and |
| the power plug and the |
| unplug the power cord from the wall outlet. |
| AC IN connector on the | 2. | Hold the plug and unplug the power cord from the |
| back of the projector |
| AC IN connector on the side of the projector. |
| match, then push the plug all the way in. |
|
|
2. | Connect the power cord to a wall outlet. |
|
|
NOTE:
•Do not use other than the provided power cord.
•Ensure all the input devices are connected and turned off before connecting the power cord.
•Do not force the connector as this may damage the projector and/or the power cord.
•Dirt or dust
•Switch off the power to the projector when not in use.
POWER indicator
POWER indicator
Indicator status | Status | ||
|
|
| |
No illumination or flashing | The MAIN POWER button is switched off. | ||
|
|
| |
Red | Lit | The MAIN POWER button is switched on and the projector is in standby. | |
|
|
| |
Green | Flashing | The POWER button is switched on and the projector is getting ready to project. | |
|
| ||
Lit | The projector is ready to project. | ||
| |||
|
|
| |
| Lit | The POWER button is switched off and the projector is cooling the lamp. | |
Orange |
|
| |
Flashing | The POWER button is switched on again when cooling the lamp and recovering to | ||
| |||
| projection mode. Recovery may take a while. | ||
|
| ||
|
|
| |
NOTE:
•While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the power cord.
•The electric consumption in standby mode is 0.08 W.
Basic Operation
