Juniper Networks EX4200, EX3200 manual Attaching the Side-Rail Bracket to the Switch Chassis

Chapter 9: Installing the Switch

Figure 41: Attaching the Side-Rail Bracket to the Switch Chassis

5.Insert the 4x6-mm Phillips flat-head mounting screws into the remaining four holes in the side-rail brackets and tighten the screws.

6.Have one person grasp both sides of the switch, lift the switch, and position it in the rack, aligning the side-rail bracket holes with the threaded holes in the front post of the rack. Align the bottom hole in both the mounting brackets with a hole in each rack rail, making sure the chassis is level. See Figure 42 on page 123.

Figure 42: Mounting the Switch to the Front Posts in a Rack

Switch

Side-rail Front

bracketbracket

g004477

7.Have a second person secure the front of the switch to the rack by using the appropriate screws for your rack.

8.Slide the rear brackets into the side-rail brackets. See Figure 43 on page 124.

Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet ■ 123