Juniper Networks EX4200, EX3200 manual EX-XFP-10GE-ZR

Chapter 3: Component Specifications

Table 21: Optical Interface Support for Gigabit Ethernet XFP Transceivers in EX3200 and EX4200

Switches (continued)

Ethernet Standard	Specifications
10GBase-ZR	Model Number	EX-XFP-10GE-ZR
	Rate	10 Gbps
	Connector Type	LC
	Fiber Count	Dual
	Transmitter Wavelength	1550 nm
	Minimum Launch Power	0
	Maximum Launch Power	4 dBm
	Minimum Receiver Sensitivity	–30 dBm
	Maximum Input Power	–7 dBm
	Fiber Type	SMF
	Core/Cladding Size	9/125 µm
	Modal Bandwidth	–
	Distance	80 km (49.7 miles)
	DOM Support	Available

Related Topics ■ Uplink Modules in EX3200 and EX4200 Switches on page 33

■show interfaces diagnostics optics

■Installing a Transceiver in an EX Series Switch on page 136

■Removing a Transceiver from an EX Series Switch on page 177

Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches

EX3200 and EX4200 switches have a field-replaceable unit (FRU) uplink module on the front panel. Table 22 on page 68 provides the uplink modules connector pinout information.

NOTE: You can use these ports to connect an access switch to a distribution switch. You can also use optional uplink module ports to connect members of a Virtual Chassis across multiple wiring closets.

Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches ■ 67