Chapter 4: Site Preparation
General Site Guidelines for EX Series Switches
Efficient switch operation requires proper site planning and maintenance, and proper layout of the equipment, rack or cabinet (if used), and wiring closet.
To plan and create an acceptable operating environment for your EX Series switch and prevent environmentally caused equipment failures:
■Keep the area around the chassis free from dust and conductive material, such as metal flakes.
■Follow prescribed airflow guidelines to ensure that the cooling system functions properly and that exhaust from other equipment does not blow into the intake vents of the switch.
■Follow the prescribed ESD prevention procedures to avoid damaging the equipment. Static discharge can cause components to fail completely or intermittently over time.
■Install the switch in a secure area, so that only authorized personnel can access the switch.
Related Topics ■ Prevention of Electrostatic Discharge Damage on EX Series Switches on page 236
■Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches
■Clearance Requirements for Airflow and Hardware Maintenance for EX3200 and EX4200 Switches on page 91
■Clearance Requirements for Airflow and Hardware Maintenance for an EX8208 Switch
■Clearance Requirements for Airflow and Hardware Maintenance for an EX8216 Switch
■Environmental Requirements and Specifications for EX Series Switches on page 85
■Installing and Connecting an EX2200 Switch
■Installing and Connecting an EX3200 or EX4200 Switch on page 113
■Installing and Connecting an EX8208 Switch
■Installing and Connecting an EX8216 Switch
Site Electrical Wiring Guidelines for EX Series Switches
Table 25 on page 84 describes the factors you must consider while planning the electrical wiring at your site.
