Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches
Configuring the LCD Panel Display on EX Series Switches (CLI Procedure)
The LCD panel on the front panel of EX Series switches shows two lines of text, each a maximum of 16 characters in length. The LCD panel displays a variety of information about the switch and also provides a menu to perform basic operations such as initial setup and reboot.
This topic describes:
1.Disabling the Maintenance Menu on page 166
2.Enabling the Maintenance Menu on page 166
3.Configuring a Custom Display Message on page 167
Disabling the Maintenance Menu
By default, the Maintenance menu in the LCD panel on an EX Series switch is enabled. Users can configure and troubleshoot the switch using the options in the Maintenance menu.
If you do not want users to be able to configure and troubleshoot the switch using the options in the Maintenance menu, you can disable the menu.
To disable the Maintenance menu in the LCD panel on EX3200 or EX4200 switches:
[edit]
user@switch# set chassis lcd fpc
where
To disable the Maintenance menu in the LCD panel on EX8200 switches:
[edit]
user@switch# set chassis lcd
If you disable the Maintenance menu while navigating through the menu options, exit the menu to return the LCD to the idle mode.
Enabling the Maintenance Menu
By default, the Maintenance menu in the LCD panel on an EX Series switch is enabled. If you have not changed the Maintenance menu from the default setting, you do not need to enable the menu.
To
[edit]
user@switch# set chassis lcd fpc
where
166■ Configuring the LCD Panel Display on EX Series Switches (CLI Procedure)
