Table 32: Inventory of Components Provided with an EX3200 or EX4200 Switch (continued)
QuantityComponent
1RJ-45 cable and RJ-45 to DB-9 serial port adapter
1Virtual Chassis cable (for an EX4200 switch)
2Virtual Chassis cable connector retainers (for an EX4200 switch)
24Dust covers for ports (for an EX4200-24F switch)
Related Topics ■Mounting an EX3200 or EX4200 Switch on page 116
■Installing and Connecting an EX3200 or EX4200 Switch on page 113
■Connecting and Configuring an EX Series Switch (CLI Procedure) on page 161
■Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 163
Mounting an EX3200 or EX4200 Switch
You can mount an EX3200 or EX4200 switch:
■On two posts in a 19-in. rack or cabinet by using the mounting brackets provided
with the switch.
■On four posts in a 19-in. rack or cabinet by using the separately orderable
four-post rack-mount kit.
■In a position recessed 2 in. from the front of a 19-in. rack or cabinet by using
the 2-in.-recess front brackets in the separately orderable four-post rack-mount
kit. You can mount the switch in this recessed position on two-post or four-post
racks and cabinets.
■On a desk or other level surface by using rubber feet. The switch is shipped with
four rubber feet to be used to stabilize the chassis on a desk or other level surface.
■On a wall by using the separately orderable wall-mount kit.
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm.) apart so
that the switch can be mounted in any rack or cabinet that provides holes spaced at
that distance.
Related Topics ■Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet on
page 118
■Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet on
page 121
■Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or
Cabinet on page 124
■Mounting an EX3200 or EX4200 Switch on a Desk or Other Level Surface on
page 117
116 ■Mounting an EX3200 or EX4200 Switch
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches