Juniper Networks EX4200, EX3200 manual Removing a Transceiver from an EX Series Switch

Chapter 13: Removing Switch Components

Figure 70: Sliding the Screwdriver to the Narrow Part of the Keyhole

Figure 71: Removing an Uplink Module from an EX3200 or EX4200 Switch

Related Topics ■ Installing an Uplink Module in an EX3200 or EX4200 Switch on page 133

■Installing and Removing EX3200 and EX4200 Switch Hardware Components on page 129

■Field-Replaceable Units in EX3200 and EX4200 Switches on page 16

■Front Panel of an EX3200 Switch on page 8

■Front Panel of an EX4200 Switch on page 10

Removing a Transceiver from an EX Series Switch

The SFP, SFP+, and XFP transceivers for EX Series switches are hot-removable and hot-insertable field-replaceable units (FRUs): You can remove and replace them without powering off the switch or disrupting switch functions.

Removing a Transceiver from an EX Series Switch ■ 177