Juniper Networks EX3200 manual Rear Panel of an EX4200 Switch

Chapter 1: EX3200 and EX4200 Switches Overview

Figure 6: EX4200-24F Switch with 24 SFP Ports

Related Topics ■

■

■

■

■

■

■

■

■

Chassis Status LEDs in EX4200 Switches on page 18

Rear Panel of an EX4200 Switch on page 11

Network Port LEDs in EX3200 and EX4200 Switches on page 20

Network Port Connector Pinout Information for an EX3200 or EX4200 Switch on page 40

LCD Panel in EX3200 and EX4200 Switches on page 13

Optical Interface Support in EX3200 and EX4200 Switches on page 43

Installing and Removing EX3200 and EX4200 Switch Hardware Components on page 129

Installing an Uplink Module in an EX3200 or EX4200 Switch on page 133

Removing an Uplink Module from an EX3200 or EX4200 Switch on page 175

Rear Panel of an EX4200 Switch

The rear panel of the EX4200 switch consists of the following components:

■Fan tray

■Virtual Chassis ports (VCPs)

■USB port

■Temperature shutdown LED

■Management Ethernet port

■Console port

■ESD point

■Power supply or power supplies

Figure 7 on page 12 shows the rear panel of an EX4200 switch. All EX4200 switches have the same rear panel. The 320 W AC power supply and the 190 W DC are flush with the chassis. The 600 W AC power supply and 930 W AC power supply extend out of the chassis by 2.25 in. Power cord retainer clips extend out of the power supply by 3 in.

Rear Panel of an EX4200 Switch ■ 11