Juniper Networks EX4200, EX3200 manual Removing Switch Components

Chapter 13: Removing Switch Components

4.Note the member ID displayed on the front panel.

5.Issue the request virtual-chassis renumber command from the Virtual Chassis master to change the member switch’s current member ID to the member ID that belonged to the member switch that was removed from the Virtual Chassis configuration).

Remove a Member Switch and Make Its Member ID Available for Reassignment to a Different Switch

When you remove a member switch from the Virtual Chassis configuration, the master keeps its member ID on reserve. To make that member switch’s member ID available for reassignment, issue the request virtual-chassis recycle command from the Virtual Chassis master.

NOTE: When you add or delete members in a Virtual Chassis configuration, internal routing changes might cause temporary traffic loss for a few seconds.

Related Topics ■ Monitoring Virtual Chassis Configuration Status and Statistics

■Adding a New Switch to an Existing Virtual Chassis Configuration (CLI Procedure) on page 105

Remove a Member Switch and Make Its Member ID Available for Reassignment to a Different Switch ■ 183