Chapter 12: Performing Initial Configuration
To
[edit]
user@switch# set chassis lcd
Configuring a Custom Display Message
You can configure the second line of the LCD to display a custom message temporarily for 5 minutes or permanently.
To display a custom message temporarily:
■On an EX3200 switch, a standalone EX4200 switch, or an EX8200 switch:
user@switch> set chassis display message message
■On an EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message
where
To display a custom message permanently:
■On an EX3200 switch, a standalone EX4200 switch, or an EX8200 switch:
user@switch> set chassis display message message permanent
■On an EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message
where
NOTE: The Menu button and the Enter button are disabled if the LCD is configured to display a custom message.
To disable the display of the custom message:
user@switch> clear chassis display message
Related Topics ■ LCD Panel in EX3200 and EX4200 Switches on page 13
■LCD Panel in an EX8200 Switch
