Lantronix 900-560 manual Import Description Configuration From Filesystem Settings

12 Advanced Settings

XML: Import Configuration from Filesystem

Import	Description
Configuration
from Filesystem
Settings
Filename	Enter the name of the file on the XPort Pro (local to its
	filesystem) that contains XCR data.
Lines to Import	Select the lines whose settings you want to import. Click
	the Select All link to select all the serial lines and the
	network lines. Click the Clear All link to clear all of the
	checkboxes. By default, all line instances are selected.
	Only the selected line instances will be imported in the
	line, LPD, PPP, tunnel, and terminal groups.
Whole Groups to	Select the configuration groups to import from the XML
Import	configuration record. This option imports all instances of
	each selected group unless it is one of the Lines to
	Import.
	Note: By default, all groups are checked except those
	pertaining to the network configuration; this is so that
	import will not break your network connectivity.
	You may check or uncheck any group to include or omit
	that group from import. To import all of the groups, click
	the Select All but Networking link to import all groups. To
	clear all the checkboxes, click the Clear All link.
Text List	Enter a string to import specific instances of a group. The
	textual format of this string is:
	<g>:<i>;<g>:<i>;...
	Each group name <g> is followed by a colon and the
	instance value <i> and each <g>:<i> value is separated by
	a semi-colon. If a group has no instance, then specify the
	group name <g> only.
	Use this option for groups other than those affected by
	Lines to Import.

XPort Pro™ User Guide 122