Lantronix 900-560 manual Introduction, Key Features, Applications

2. Introduction

The XPort Pro embedded Ethernet Device Server is a complete network-enabling solution in a 13.50 (0.531) X 16.25 (0.640) X 33.90 (1.335) package. This miniature device server empowers original equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet networking and web page serving capabilities built into their products. [DIMS = mm (in.)]

Key Features

￿Power Supply: Regulated 3.3V input required. There is a step-down converter to 1.5 volts for the processor core. All voltages have LC filtering to minimize noises and emissions.

￿Controller: A Lantronix DSTni-FX 32-bit microprocessor, running at 166 MHz internal bus and 83 MHz external bus.

￿Memory: 16 MB Flash and 8 MB SDRAM. Please contact your sales representative if you need larger memory sizes.

￿Ethernet: 10/100 Mbps Ethernet transceiver

￿Serial Ports: One full, RS232-supporting high-speed serial port with all hardware handshaking signals. Baud rate is software selectable (300 bps to 921600 bps).

Note: The standard baud rate of 460800 bps is not supported.

￿Configurable IO Pins (CPs): Up to three pins are configurable as general purpose I/Os if no DTR or DCD is used on serial ports. Not 5V tolerant.

￿Interface Signals: 3.3V-level interface signals.

￿Temperature Range: Operates over an extended temperature range of -40°C to +85°C.

Applications

The XPort Pro device server connects serial devices such as those listed below to Ethernet networks using the IP protocol family.

￿ATM machines

￿CNC controllers

￿Data collection devices

XPort Pro™ User Guide 13