Lantronix 900-560 manual Line 1 Configuration, Description, Page Settings

6 Line, Tunnel, Terminal, and Host Settings

Line 1 Configuration

This page shows the configuration settings for the serial line selected at the top of the page and lets you change the settings for that serial line.

To configure Line 1:

1.Click Line 1 and Configuration at the top of the page. The Line 1 Configuration page appears.

Figure 6-2. Line 1 Configuration

2. Enter or modify the following settings:

Line -	Description
Configuration
Page Settings
Name	Enter a name for the line. The default Name is blank.
Interface	Select the interface type from the drop-down menu. The
	default is RS232.
State	Indicates whether the current line is enabled. To change the
	status, select Enabled or Disabled from the drop-down
	menu.

XPort Pro™ User Guide 34