6 Line, Tunnel, Terminal, and Host Settings
Packing Mode
When in Packing Mode, data is not transferred one byte at a time. Instead, data is queued and sent in segments.
To configure the tunnel Packing Mode:
1.Select Tunnel 1 and Packing Mode at the top of the page. The Tunnel 1 Packing Mode page appears. Depending on the Mode selection, different configurable parameters are presented to the user. The following figures show the display for each of the three packing modes.
Figure 6-6a. Tunnel 1 Packing Mode (Mode = Disable)
Figure 6-7b. Tunnel 1 Packing Mode (Mode = Timeout)
XPort Pro™ User Guide | 40 |
