![](/images/new-backgrounds/1098766/9876683x1.webp)
6 Line, Tunnel, Terminal, and Host Settings
Accept Mode
In Accept Mode, the XPort Pro listens (waits) for incoming connections.
To configure the tunnel’s Accept Mode:
1.Click Tunnel 1 and Accept Mode at the top of the page. The Tunnel 1 Accept Mode page appears.
Figure 6-9. Tunnel 1 Accept Mode
2. Enter or modify the following settings:
Tunnel - | Description |
Accept Mode |
|
Page Settings |
|
|
|
Mode | Select the method used to start a tunnel in Accept mode. |
| Choices are: |
| Disabled = do not accept an incoming connection. |
| Always = accept an incoming connection. (default) |
| Any Character = start waiting for an incoming connection |
| when any character is read on the serial line. |
| Start Character = start waiting for an incoming connection |
| when the start character for the selected tunnel is read on the |
| serial line. |
|
|
XPort Pro™ User Guide | 42 |