Lantronix 900-560 manual FTP Page Settings, Description, 4. FTP Configuration

8 Services Settings

Traps Enabled

Select On to enable the transmission of the SNMP cold start trap messages. This trap is generated during system boot.

Primary Trap Dest IP

Enter the primary SNMP trap host.

Secondary Trap Dest IP

Enter the secondary SNMP trap host.

3.Click Submit.

4.In the Current Configuration table, delete and clear currently stored settings as necessary.

FTP Configuration

This page shows the current File Transfer Protocol (FTP) configuration and connection status and various statistics about the FTP server.

To configure FTP:

1.Click FTP on the menu bar. The FTP page opens to display the current configuration.

Figure 8-4. FTP Configuration

2. Enter or modify the following settings:

FTP Page Settings

Description

State

Select Enabled to enable the FTP server.

Admin Username

Enter the username to use when logging in via FTP.

Admin Password

Enter the password to use when logging in via FTP.

XPort Pro™ User Guide 65