Juniper Networks EX4200, EX3200 manual XFP Uplink Module

Chapter 2: Component Descriptions

Figure 26: XFP Uplink Module

Status LED Status LED

g020108

Port 0	Port 1
Link/Activity	Link/Activity
LED	LED

XFP uplink modules are shipped with a dust cover preinstalled in one port.

The XFP uplink module requires JUNOS Software for EX Series switches, Release 9.0 or later.

Related Topics ■

■

■

■

Network Port LEDs in EX3200 and EX4200 Switches on page 20

Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches on page 67

Optical Interface Support in EX3200 and EX4200 Switches on page 43

Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch

■Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch

■

■

Installing an Uplink Module in an EX3200 or EX4200 Switch on page 133

Troubleshooting Uplink Module Installation or Replacement on EX3200 and EX4200 Switches on page 192

Uplink Modules in EX3200 and EX4200 Switches ■ 37